Is it time to upgrade your washing machine? Installing a washing machine is fairly quick and straightforward if you’re replacing an old one. However, it may be possible to install one from scratch if you have some familiarity with basic plumbing. Keep reading to learn how to install a washing machine to both new and existing plumbing.
1. Turn Off the Water
Before you start disconnecting pipes, you’ll need to turn off the main water supply to your house. You can do this by turning the shut-off valve on your water main.
2. Install the Water Supply Line
If you don’t have plumbing set up for the washing machine, you’ll need to install your own. You can do this by locating the water supply line, cutting the pipe, and installing a tee fitting. Next, connect a new length of pipe from the tee fitting to where the washer will be placed.
3. Connect to the Drain
The washing machine will need a way to drain used water. If your laundry room lacks drainage, you can install a drain pipe using the same method outlined above. However, instead of tapping into the water supply line, this pipe will connect to the drainpipe.
5. Connect Washing Machine
If you already have the plumbing in place, you can skip ahead to this step. All you have to do is remove the old machine and connect the new one to the drain and supply connections. You will also need to level the unit and plug it into a power source. Be sure to do a test run to ensure there aren’t any leaks!
Local Plumbing Pros
Following these easy steps, you can have your washing machine installed in no time. However, don’t feel bad if you’re not confident installing your own machine; this isn’t a beginner project! That’s why Gibson Plumbing & Mechanical is here to help.
Our Sparks, NV, plumbing services include plumbing repair, water heater installation, and toilet repair and replacement. We also offer heating and cooling services such as installation, maintenance, and repair. To have your washing machine installed professionally, call us today!